ScanINSPECT WBI provides a simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, high-end AOI systems.

ScanINSPECT WBI uses a simple Windows user interface integrated with a manual load table and image-processing unit. This combination allows 100% inspection of presence/absence of wire bonds.

How Does ScanINSPECT WBI Work?

ScanINSPECT WBI provides 100% 2D non-contact verification of absence / presence of Al or Au wire bonds before adding further value to the assembly.

Provides offline inspection for low volume production or SPC sampling for high volume production.

Each part or substrate is placed from the wirebonder into ScanINSPECT WBI for 100% inspection. The part is then accepted and continues on with the process or rejected for disposition. No more surprises!

Quick & Simple Programming

ScanINSPECT WBI is quickly programmed from a golden part in a few minutes.

Increased Yield & Improved Overall Equipment Efficiency

ScanINSPECT WBI’s powerful inspection process increases product yield by ensuring accurate wire bond placement. Thus, assisting with high yields and minimal rework and/or scrap.

Missing wire bonds can result in lost production time and extensive rework. WBI eliminates operator fatigue and tedium from the inspection task, and automatically verifies 100% of the bonds.

Missing wire bonds are now automatically detected. Problems are logged and eliminated before more value is added to defective parts.


ScanINSPECT WBI set up is fast and easy. In production, each board is placed on the inspection table, scanned, and automatically aligned and checked for accuracy with a PASS or FAIL inspection in seconds.

Failures are detected, logged and printed for easy rework identification.


  •  Mandatory: 100% automatic inspection of wire bonds.
  •  Security:     Confirm wire bond absence / presence.
  •  Necessity:   Detect errors before adding further value to defective parts.
  •  Flexibility:    Inspect a wide variety of part sizes and shapes

Technical Specifications*

System Specifications*

  •  Maximum Board Size: 18″ X 24″ (457mm X 610mm)
  •  Maximum Inspection Area: 16.5″ X 22″ (419mm X 559mm)
  •  Scanning Resolutions:
    400/1000/1600/2000/2400/3200/4000/4800 dpi

Footprint of Inspection Unit

  •  Depth: 31.5″ (800mm), table extended 49.5″ (1,257mm)
  •  Width: 27.25″ (692mm)
  •  Height: 19″ (482mm)
  •  Weight: 150lbs. (55.95kg)


  •  Multi Core Processor – 3 GHz
  •  1 TB 7200 RPM HD, 8 – 16 GB RAM
  •  CD/DVD ROM –  for archive purposes
  •  Flat Screen Monitor (17″ or larger)
  •  Ethernet connection
  •  Windows 10 – 64-Bit
  • 2 available USB ports – USB2 or USB3

*Recommended customer-supplied minimum PC requirements.

The following are trademarks of the indicated companies: ScanFAB™ is a trademark of ScanCAD International, Inc. *All specifications and designs subject to change without notice.*

Friendly, Flexible, Innovative & Global

ScanCAD International, Inc. continues to flourish and evolve to successfully meet ever-changing technology requirements.
All ScanCAD products were developed at the request of its customers, therefore your comments and suggestions are welcome.

The owner of this website has made a commitment to accessibility and inclusion, please report any problems that you encounter using the contact form on this website. This site uses the WP ADA Compliance Check plugin to enhance accessibility.